Category: Products
Optical transceiver modules and components
98 articles
SPS-S58XX Series 10GE Routing Switches Carrier-Level Aggregation Layer-3 Ethernet Switch
SPS-S58XX Series is a new generation of full-10GE routing switches, adopting the most advanced hardware architecture design, supporting up to 2.56Tbps switching capacity and 48 10GE ports + 2 40GE ports + 4 100G ports or 72 10GE ports. Supports BVSS, TRILL, SDN and FCoE/FC, providing data center-level high reliability, comprehensive security mechanisms, versatile IPv6 solutions, etc. Includes SPS-S5828, SPS-S5832, SPS-S5864, SPS-S5864H four models.
SOPTO
SPS-S2900-P L3-Lite Series L3-Lite Managed PoE Switch
The SPS-S2900-P L3-Lite Series is a next-generation aggregation 10GE switch introduced by SOPTO, targeted at IP MAN, government and enterprise networks, Internet café and diskless working environment. Supports BVSS virtual switching system, industrial-grade Ethernet ring, carrier-level QoS policies, intelligent PoE+ and more, with 8/24/48 port models available, maximum PoE budget 760W.
SOPTO
SPFC-NV-144H-5/5A Dome Fiber Optic Splice Closure
SPFC-NV-144H-5/5A is a dome fiber optic splice closure suitable for duct, buried, overhead applications, made of high-quality PP and ABS materials, supports FTTH applications, maximum 144 cores (single core) or 288 cores (ribbon), IP68 rating, 2-year warranty, lifespan over 25 years.
SOPTO
SPTK-HS06 Fiber Thermal Stripper
SPTK-HS06 is a fiber thermal stripper with ergonomic design, 4s heating time with LED notification, low pulling force needed, suitable for 200-400μm coated ribbon fibers, supports 1-12 core bundle fiber/bare fiber/ribbon fiber/invisible fiber, approximately 400 stripping cycles.
SOPTO
SPTK-4108X Optical Fiber Fusion Splicer
SPTK-4108X is a 4-motor optical fiber fusion splicer using PAS alignment technology, supporting SM/MM/DS/NZDS/BI fiber types, typical splice loss 0.02dB(SM), 4000mAh large capacity battery supports 240 splice and heat cycles, designed for harsh environments.
SOPTO
SPFC-NV-144H-2/18A Dome Fiber Optic Splice Closure
SPFC-NV-144H-2/18A is a dome fiber optic splice closure used for straight-through connection in optical transmission process, providing protection for joint connections, supporting up to 144 cores, IP68 protection level, suitable for overhead, pole, wall and underground installation.
SOPTO
SPT-OP08G-DR8R 800G OSFP DR8 RHS Pluggable Optical Transceiver
SPT-OP08G-DR8R is an 800G OSFP DR8 RHS pluggable optical transceiver, compliant with OSFP MSA 5.0 and CMIS 5.1, 8x106.25Gbps PAM4 modulation, 1310nm wavelength, 500m SMF reach, dual MPO-12/APC interface, power dissipation ≤16.5W.
SOPTO
SPFC-NH-xxM-2/2C Fiber Optic Closure — Horizontal Splice Type, up to 144 Cores, 2IN 2OUT
SPFC-NH-xxM-2/2C fiber optic closure meets YD814.1-2004 standard with high-strength ABS housing. Supports 1:8 to 1:16 splitting ratios, max 144 cores. Suitable for overhead, duct, underground and manhole applications.
SOPTO
SPTK-4600B Optical Fiber Fusion Splicer — Six-Motor Core Alignment for Backbone Networks
SPTK-4600B optical fiber fusion splicer features six-motor core alignment, typical splice loss as low as 0.02dB, automatic fiber identification, and GPS tracking. Designed for harsh environments and backbone projects.
SOPTO
SPT-NB3503(5303)-S02TD 155Mb/s PECL Multi-Mode Bi-DI Transceiver
SPT-NB3503(5303)-S02TD is a 155Mb/s PECL multi-mode bi-directional optical transceiver, supporting 1310nm/1550nm wavelength, standard 1x9 package, suitable for SDH/ATM/Ethernet fiber optic transmission systems.
SOPTO
SPDF-1728SF-FSMB ODF Indoor Floor Type 1728 Cores SC/2LC Fiber Distribution Frame
S-Opto SPDF-1728SF-FSMB ODF indoor floor type fiber distribution frame, 1728 cores capacity, cold-rolled/galvanized steel sheet, 45° tilt adapter installation, suitable for data center.
SOPTO
SPU-GE4200AW6-H XPON ONU Wifi 6 4GE+CATV+Dual-Band WIFI
S-Opto SPU-GE4200AW6-H XPON ONU, supporting EPON and GPON dual-mode, 4 Gigabit Ethernet ports, CATV function, Wifi 6 AX1500 dual-band WIFI.
SOPTO