SPTK-HS06 Fiber Thermal Stripper
Features
- Ergonomic design
- 4s heating time with LED notification
- Low pulling force needed
- Stripping for 200-400μm coated ribbon fibers
- Suitable for 1-12 core bundle fiber/bare fiber/ribbon fiber/invisible fiber
- Approximately 400 stripping cycles
Specifications
| Parameter | Specification |
|---|---|
| Applicable optical fiber | Glass optical fibers |
| Fiber count | 1 to 12 |
| Cladding diameter | 125μm |
| Stripping length | 30mm |
| Coating diameter | 200 to 400μm |
| Power mode | Std/Eco Mode |
| Heating temperature | 80/90/100/120°C |
| Heating time | 4 sec, 5 sec at Eco mode |
| Battery capacity | 7.4V, 2000mAh Rechargeable Lithium Ion, Approx. 400 strips with Eco mode |
| Operating conditions | Temperature: -10 to 40°C, Humidity: 0 to 95%RH (Non-condensing) |
| Power supply | USB Type-C (5V/3A, 9V/2A, 12V/1.5A) |
| Dimensions | 123L×48W×32H (mm) |
| Weight | 365g |
Standard Accessories
| Accessory Name | Quantity |
|---|---|
| Thermal Stripper | 1 |
| USB Type-C charge cable | 1 |
| Mini brush | 1 |
| Storage Box | 1 |
Operating Steps
- Press the "Power button" to turn on the device
- Place the optical fiber to be stripped into the "optical fiber clamp", then place the clamp into the "clamp fixing slot", and close the "clamp cover" and "optical fiber cover"
- Hold the groove on the "clamp cover" with your left hand, and hold the groove on the "fiber cover" with your right hand and wait for the "temperature indicator" to change from red to green
- Hold the groove on the "clamp cover" with your left hand, and hold the groove on the "fiber cover" with your right hand and wait for the "temperature indicator" to change from red to green, complete the stripping operation
Ordering Information
| Part Number | Product Description |
|---|---|
| SPTK-HS06 | Fiber Thermal Stripper |
Note: If you need more customized services, please contact us.
Contact Us
Email: info@sopto.com.cn
Website: http://www.sopto.com.cn
