Product Overview
This product is designed for indoor cable termination and fiber pigtail splicing in buildings and villas.
Product Features
- Compact and lightweight design: Small size, light weight, and attractive appearance, suitable for indoor environments
- Wall-mounted installation: Can be installed on a wall with mechanical protection
- Multiple fiber connections: Supports multiple fiber connection methods — direct splicing and divergent connection — compatible with SC duplex adapters
- Effective fiber management: Enables efficient management of fibers
- Flip tray: The flip tray increases fiber management space, providing clear fiber splicing and distribution while reducing line crossing
Technical Index
| Item | Specification |
|---|---|
| Fiber bend radius | ≥30mm |
| Additional loss of optical disk | ≤0.01dB |
| Temperature Range | -10°C ~ +70°C |
| Lateral pressure resistance | ≥2000N/10cm |
| Shock resistance | ≥20N.m |
| Protection level | IP54 |
Specifications
| Item | Value |
|---|---|
| Product Model | SPDF-O4SCS-PMPB |
| Size (mm) | 210×140×40 |
| Weight (kg) | 0.35 |
| Cable diameter (mm) | φ7 ~ φ10 |
| Cable inlet/outlet | 1/4 |
| Capacity (cores) | 4 (single core) |
Installation Procedure
- Pre-install: Pre-install the box in the desired position with expansion screws; installation hole: φ5mm
- Open the lid: Open the lid, install the adapters in the rack and fasten them with screws
- Strip the cable: Strip the cable, remove the outer and inner sheath and loose tube, clean and remove the oil filling paste in the cable, leaving 0.6~1.2m of bare fiber. Fix it with the cable pressing card, fasten it with the reinforced card, introduce the fiber into the splice tray and coil it, and lead the fiber end to the splicing slot
- Install PLC: Clip the PLC into the PLC slot, coil the PLC fiber pigtail in the tray, and leave the fiber end in the splicing slot
- Connection: Connect the outgoing fiber to the other side of the adapters and fasten it with the cable pressing card. After passing through the sealing rubber, the fibers are led out. Cover the lid and lock it with the key
Packing List
| Name | Quantity |
|---|---|
| Main box | 1 set |
| 40mm heat shrinkable tube | 1~4 pcs |
| Key | 1 pc |
| M4×25 expansion screw | 2 sets |
| Manual | 1 pc |
Ordering Information
| Part Number | Product Description |
|---|---|
| SPDF-O4SCS-PMPB | Splitter Distribution Box, outdoor wall-mounted, 4 cores, Simplex SC / Duplex LC type available, for steel tube splitter installation, without adapter, pigtails and splitter, Plastic type B |
Applications
- Indoor cable termination in buildings
- Villa fiber optic network terminals
- Indoor fiber splicing and distribution
- FTTH (Fiber to the Home) networks
- Indoor fiber management
Contact Information
Email: info@sopto.com.cn
Web: http://www.sopto.com.cn
Note: For customized solutions, please contact us.
